B-Line Eaton series distribution accessories, Brushed aluminum, 9 terminal blocks, Universal connector mounting bar

Nine terminal blocks. It is the 9-position version of the Eaton B-Line SB-650 universal connector mounting bar, finished in brushed aluminum. If your block count is higher or lower, you want a different position count in the same SB-650 family rather than doubling up on this bar.

Yes, the SB-650-09 BRSH universal connector mounting bar is UL Listed. That is the rating most facility and institutional specs call out for hardware going into a distribution frame, so it clears the usual inspection question on a commercial job.

It is the vertical rail that carries your terminal blocks or connector modules inside a distribution frame, so the blocks land on a common plane at a fixed spacing instead of being fastened one at a time to the frame. The Eaton B-Line SB-650-09 BRSH is the 9-block version: mount the bar to the frame uprights, then populate it. It is a mounting accessory, not a connector or block itself, so the blocks are ordered separately.

No. What you get is the brushed aluminum bar itself, drilled and sized for nine terminal block positions. The blocks, the connectors, and the cabling all get specified and ordered separately. Plan on that when you are building a bill of material for a frame buildout.

Order Eaton B-Line SB-650-09 BRSH. The SB-650 is the series, the 09 is the nine terminal block positions, and BRSH is the brushed aluminum finish. There is one configuration under that number, so there are no further options to specify.

This one is brushed aluminum, which is the standard mill-type finish on Eaton B-Line distribution frame accessories and the usual match for existing frame hardware. If the bars already in the room are painted or a different B-Line finish code, the 9-position bar in brushed will read differently next to them, so match the suffix on what is installed before you standardize a building on it.