B-Line Eaton series double sided 18 inch shelf width distribution , 108" height, 31.62" length, 18" width, 10 vertical with 12 shelves, ASTM A36 steel

No. This is a distribution frame for terminal block and cross connect work, 18 inches wide with 12 shelves, not a 19 inch EIA rack with rack units for mounting active gear. If you are installing switches, patch panels or rack mount servers, order a 19 inch relay rack or cabinet instead.

It is the steel framework that carries terminal blocks for central cross connects, typically the main or intermediate distribution frame in a telecom room. Double sided means blocks and shelves mount on both faces, so one 18 inch wide footprint gives you two working sides of termination instead of one. If your room only allows access from one side because the frame goes against a wall, a single sided frame is the better choice.

It is built as 10 verticals with 12 shelves, at 18 inch shelf width. That is the termination capacity you are buying, so count the blocks you need to land before ordering. Frames in this series are also configured with other vertical and shelf counts, so if 12 shelves is short for your block count you want a different configuration rather than trying to add shelves later.

No. What you get is the frame itself, 10 verticals with 12 shelves in steel, sized to support terminal blocks for central cross connects. Blocks, cross connect wire, vertical and horizontal cable management and the floor or wall anchors for your specific structure are all separate items on the order.

Steel construction to ASTM A36, finished in Telco gray powder coat, which is the standard grey a central office or telecom room is normally specified in. That matches it visually to existing B-Line frames and racking already in most telco spaces.

Certifications on the SB60210810TG frame read as not applicable, so specify it on submittals by its physical data instead: 108 inch height, 31.62 inch depth, 18 inch width, ASTM A36 steel, Telco gray powder coat, 10 verticals with 12 shelves.