B-Line Eaton series double sided 18 inch shelf width distribution , 138" height, 31.62" length, 18" width, 5 vertical with 16 shelves, ASTM A36 struct

It supports terminal blocks for central cross connects. The double sided build with 5 verticals and 16 shelves gives you block mounting on both faces of the frame, which is how central office and large MDF rooms get density out of a single floor run.

441 pounds for the frame itself, before any terminal blocks or cable. At that weight it is a rigged and anchored install, not a two-man carry, and the load sits on an 18 by 31.62 inch footprint, so check the floor rating in the room. Material is ASTM A36 structural steel.

Double sided means blocks mount on both faces, so you get roughly twice the cross-connect capacity in the same floor footprint, but you need clear working aisle on both sides of the frame. If the frame has to go against a wall, a single sided distribution frame is the correct type. This unit is configured double sided with 5 verticals and 16 shelves.

18 inch shelf width, matching the 18 inch overall frame width. Sixteen shelves are included across the five verticals, so size your terminal blocks and horizontal cable management to the 18 inch shelf.

Order Eaton B-Line part number SB60213805TG. That is the double sided, 18 inch shelf width, 138 inch tall configuration with 5 verticals and 16 shelves.

Telco gray powder coat over steel. That is the standard central office color, so it lines up visually with existing telco-gray racks and ladder rack in the same room.