B-Line Eaton series double sided 18 inch shelf width distribution , 84" height, 31.62" length, 18" width, 7 vertical with 8 shelves, ASTM A36 steel, T

The SB60208407TG measures 84 in height, 31.62 in length/depth and 18 in width. At 84 inches tall it stands exactly 7 feet, so a room with a 7-foot finished ceiling leaves no clearance for lifting or anchoring the frame upright; plan on tipping it up in a taller space or a room with at least a foot of headroom above the frame. The 31.62 in depth is the run direction and the 18 in dimension is the shelf width.

It is the steel skeleton that carries terminal blocks for central cross connects, the point where incoming cable pairs are terminated and jumpered to station or equipment side. Double sided means blocks mount on both faces of the frame, so one 31.62 in deep footprint gives you two working surfaces instead of one. The 7 vertical by 8 shelf layout is what sets how many block positions you get. If you only need equipment mounting for rack-unit gear, this is the wrong product type; a 19 in relay rack or cabinet is what you want.

Order model SB60208407TG. It is a single fixed configuration: 18 in shelf width, 84 in high, 31.62 in deep, double sided, 7 vertical with 8 shelves. Shelf width, height and shelf count are not selectable on it, so if your cross-connect count calls for a different vertical or shelf arrangement you need a different B-Line frame part number rather than an option on this one.

367 lb bare, before any terminal blocks, cross-connect wire or cable are loaded on it. That is a two-person minimum handling item and realistically a pallet-jack or cart delivery to the room. Because it is a double sided frame with 8 shelves across 7 verticals, loaded weight climbs well above the bare figure, so treat the floor loading and any seismic or overhead anchorage as an engineered detail for your site rather than a drop-in placement.

Steel construction, specifically ASTM A36 structural steel, with a Telco gray powder coat. That is the standard finish in central office and telecom rooms, so it will match existing gray-coated frames and racks in the same space. Powder coat over A36 is fine for conditioned indoor telecom and MDF rooms; it is not a specified outdoor or wash-down finish.

No certification applies to the SB60208407TG frame. It is unfinished structural hardware from a code standpoint, an ASTM A36 steel support frame, so what you submit on it is the material spec and the dimensions rather than a listing mark. Any UL or listing requirement in your job spec will attach to the terminal blocks, protectors and cable you mount on it, not to the frame.