B-Line Eaton series double sided 24 inch shelf width distribution , 120" height, 37.62" length, 24" width, 10 vertical with 13 shelves, ASTM A36 struc

The SB60312010TG measures 120 inches high, 37.62 inches long (depth) and 24 inches wide. At 120 inches tall it needs a room with at least 10 feet of clear height plus working clearance above, so check ceiling height, sprinkler heads and cable tray routing before it goes in. Shelf width is 24 inches.

The frame weighs 873.697 lb bare, before any terminal blocks, cross connect wire or cable is loaded on it. On a raised floor that is a real number to check with the floor manufacturer, and on slab it is worth planning rigging and an anchor pattern for a unit this tall. It is structural steel construction, which is where the weight comes from.

It is the steel skeleton for central office style cross connect work: it supports terminal blocks for central cross connects. Double sided means blocks and shelves are accessible from both faces of the frame, so you get roughly twice the termination capacity in the same floor footprint, at the cost of needing working aisle on both sides. The SB60312010TG is configured with 10 verticals and 13 shelves.

Because it is a double sided frame, you have to leave a working aisle on both faces, not just the front. Footprint on the floor is 37.62 inches by 24 inches. Plan aisle depth off the two long faces for technicians running jumpers, and remember that at 120 inches tall the upper shelves need a ladder or rolling platform in that aisle.

Telco gray, which is the standard finish for central office and MDF rooms, so it lines up with existing frame lineups and cable rack in most telecom spaces. The TG at the end of the model number SB60312010TG is that finish.

ASTM A36 structural steel, not light gauge formed sheet. A36 is the common carbon structural steel grade used for building framing members, which is what lets a 120 inch double sided frame carry a full load of terminal blocks and cable without racking.

Ten verticals with 13 shelves, at 24 inch shelf width. That configuration is fixed for model SB60312010TG, so if your cross connect count calls for a different vertical or shelf count you need a different model in the Eaton B-Line series rather than an option code on this one.