B-Line Eaton series double sided 24 inch shelf width distribution , 138" height, 37.62" length, 24" width, 2 vertical with 16 shelves, ASTM A36 steel,

It is a floor standing steel frame that supports terminal blocks for central cross connects, the main point where outside plant and building cabling get terminated and jumpered. Double sided means blocks mount on both faces, so you get twice the termination capacity in the same 24 inch wide footprint. The SB60313802TG is built with 2 verticals carrying 16 shelves.

Shipping and installed weight is 207.752 lb for the bare frame, before any terminal blocks, cross-connect blocks or cable are loaded on the 16 shelves. On a raised access floor that point load usually needs pedestal support or a base channel under the frame; on slab it is not an issue.

Yes, the frame is a 24 inch shelf width configuration, matching the 24 inch overall frame width. All 16 shelves run that width, so size your terminal blocks and mounting plates to 24 inches.

Go single sided if the frame sits tight against a wall, because you can only reach one face and half the mounting space on a double sided unit is wasted. The SB60313802TG is the double sided version with 2 verticals and 16 shelves, which pays off when the frame is freestanding in a row and both faces are accessible for cross-connect work.

Order Eaton B-Line model SB60313802TG. That number covers the double sided 138 inch tall frame, 24 inch width, 37.62 inch depth, with 2 verticals and 16 shelves. There are no finish or size options to specify on it.

It is fabricated from ASTM A36 structural steel and finished in Telco gray, the standard color for central office and telecom equipment rooms, so it matches existing frame lineups and racks in the same space.