B-Line Eaton series double sided 24 inch shelf width distribution , 138" height, 37.62" length, 24" width, 7 vertical with 16 shelves, ASTM A36 struct

Footprint is 37.62 inches on the length/depth dimension by 24 inches wide. Because it is a double sided frame, shelves face both ways, so you need working aisle on both sides rather than backing it to a wall.

It is a universal distribution frame built to support terminal blocks for central cross connects, the main cross connect field in a telecom or central office room. The double sided build with 7 verticals and 16 shelves gives you block mounting on both faces of the same run rather than doubling your floor space.

Seven verticals with 16 shelves, shelves at 24 inch width. Split across a double sided frame that works out to eight shelf positions per face for terminal block mounting.

Double sided, like the SB60313807TG, puts terminal blocks on both faces of one 37.62 by 24 inch footprint and is what you want for a central cross connect field in the middle of the room with aisles on both sides. Go single sided instead if the frame has to sit against a wall or in a shallow room where you cannot get technician access to both faces.

What is specified here is the frame itself: 7 verticals, 16 shelves, ASTM A36 steel, Telco gray. The terminal blocks it supports are ordered separately, as are any anchors, ladder rack and cable management you route to it.

Steel construction, specifically ASTM A36 structural steel, finished in Telco gray. That is the standard finish for central office equipment, so it matches existing frames and ladder rack in a telecom room.

Order it as Eaton B-Line SB60313807TG. That is the single model covering the 138 inch tall, double sided, 24 inch shelf width configuration with 7 verticals and 16 shelves.