B-Line Eaton series double sided distribution junction kit, 84" height, 64" length, 18" width, Support terminal block cross connect, Universal distri

The SB60208412TG is built to 84 inches height, 64 inches length/depth and 18 inches width. The 84 inch height is the standard central office frame height, so plan for overhead cable rack clearance above it and confirm your room can take a 64 inch run on an 18 inch wide footprint before you set anchors.

It is a junction kit, the hardware that joins and supports the frame for terminal block mounting, not the blocks themselves. Order your terminal blocks, cross connect jumper wire and cable rack separately. The kit is specified as universal distribution frame double sided, so it is built to accept blocks on both faces.

It is the steel skeleton that carries terminal blocks for central cross connects, the point where outside plant cable is jumpered to inside equipment. Double sided means blocks mount on both faces of the frame, so one 18 inch wide footprint gives you two working sides instead of one. If you only need single-sided termination against a wall, a double sided frame wastes floor access on the back face.

Steel construction, and the description calls out ASTM A36 structural steel. That is the standard hot-rolled carbon structural grade used for frame uprights and channel, which is what lets the frame carry loaded terminal blocks on both faces without supplemental bracing.

One model covers it: Eaton B-Line SB60208412TG. There is no finish or size choice to specify, the 84 x 64 x 18 inch double sided configuration is the part itself.

No certification is carried on the SB60208412TG. It is structural steel framing hardware rather than an electrical device, so treat it as a mechanical support item when you write your submittal, and take grounding and bonding of the frame from your project spec.