You may also like
B-Line Eaton series cable support fasteners, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.062lbs, Cable to rod fasteners, M10 rod size, 1 Max
Model: BLN-BX4-W2
Eaton B-Line series cable support fasteners, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.062lbs, Cable to rod fasteners, M10 rod size, 1 Max runs
B-LINE
$557.23
B-Line Eaton series cable support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.062lbs, Cable to beam fasteners, .56" Min mount size, .7
Model: BLN-BX4-U-9-12
Eaton B-Line series cable support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.062lbs, Cable to beam fasteners, .56" Min mount size, .75" Max mount size, M10 rod size, 1 Max runs
B-LINE
$843.64
B-Line Eaton series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Offset bracket fasteners, 0.25"-20 rod
Model: BLN-BH4-H8
Eaton B-Line series all threaded rod and drop wire supports, Hangers, 1" Height, 1" Length, 1" Width, 0.062lbs, Offset bracket fasteners, 0.25"-20 rod size, 160 lbs load capacity
B-LINE
$481.24
Eaton B-Line series fastener hardware and accessories, 1" Height, 1" Length, 1" Width, 0.062lbs, 18-27 mm rod size, Dura-Copper
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .4 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Finish:
- Copper
- Product Material:
- Steel
- Product Length:
- 1 in
B-LINE BM2-16T-DCU – Frequently Asked Questions
1) What rod size does the Eaton B-Line BM2-16T-DCU fitting take?
The BM2-16T-DCU is sized for 18-27 mm rod. If your threaded rod or hanger falls outside that band, this is the wrong part for the run.
2) Is the B-Line BM2-16T-DCU UL listed for electrical work?
Yes. The BM2-16T-DCU carries a UL/CUL listing, which is what an institutional or municipal inspector will look for on supported electrical raceway and hanger hardware.
3) What is the Dura-Copper finish on the B-Line BM2 fitting, and where would you use it?
It is a steel body with a copper finish. Electricians specify copper-finish hardware where the fitting contacts or sits alongside copper systems, so the visible hardware matches and you avoid mixing bare dissimilar surfaces at the support point.
4) How much space does the B-Line BM2-16T-DCU take up on a hanger?
It is a compact fitting, 1 inch in height, 1 inch in length and 1 inch in width, so it fits tight ceiling cavities and congested rod runs without fouling adjacent trades.
5) Is BM2-16T-DCU the full part number I order from, or do I have to pick a size?
BM2-16T-DCU is the complete Eaton B-Line ordering number. There is no separate size or finish to select against it, the copper finish and the 18-27 mm rod range are both built into that number.
How fast can I get the B-LINE BM2-16T-DCU delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BM2-16T-DCU come with a warranty?
Absolutely. The B-LINE BM2-16T-DCU is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BM2-16T-DCU?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BM2-16T-DCU from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.