B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Black powder coat finish, Steel, 107.3" actual area inside tr

It's an 18 inch wide by 6 inch deep wire basket tray section, with 107.3 square inches of actual area inside the tray for cable fill. Overall height on the section is 6.38 inches and the length is 118.312 inches, so it's a nominal 10 foot stick. That inside-area figure is the number to use when you're running a fill calculation against your cable bundle diameters.

No. The FT6X18X10 BLE is specified for controlled interior applications, and it's steel with a black powder coat finish. That's a painted carbon steel product, not stainless or hot-dip galvanized, so leave it out of exterior runs, parking structures, wet process areas and corrosive environments. For those, specify a tray in a finish rated for the exposure.

Wire basket like this 6 inch deep B-Line Flex tray is an open mesh channel. Cable drops out anywhere along the run without a knockout, airflow passes straight through, and you can field-cut and bend the mesh to route around obstructions instead of ordering fittings. Solid bottom is what you want when you need the cable shielded from falling debris or dust; ladder tray is the heavier choice for large power feeders on long support spans. For low voltage and comms in a conditioned interior, basket is the usual pick, and this one is specified for controlled interior use.

This section is finished in black powder coat, which is the common choice when the overhead pathway is exposed in a data hall or an open-ceiling office and the spec calls for everything above the racks in black. If your existing runs are pre-galvanized or zinc finish, the black will not blend, so order all sections of a given run in the same finish.

CE is the certification listed for this Flex tray section. No other marking is carried on it, so if your project specification calls out a particular listing beyond that, verify against the spec before releasing the order.