B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Black powder coat finish, Steel, 47.3" actual area inside tra

It's a 6 inch deep flex wire basket tray, model FT6X8X10 BLE, measuring 6.38 x 118.312 x 8 inches with 47.3 square inches of usable area inside the tray. That works out to roughly a 10 foot stick, so pathway runs get laid out in 10 foot increments plus splice points.

No. The FT6X8X10 BLE carries a black powder coat over steel and is specified for controlled interior use only. Exterior runs, parking structures, food processing wash-down and corrosive or high-humidity spaces call for a hot dip galvanized or stainless basket instead.

For telecom, fiber and low voltage in a controlled interior, basket tray like this 6 x 8 flex section is the usual pick. The open mesh gives continuous cable support with no sharp transitions, drops out anywhere along the run, and ventilates the bundle. Ladder or solid-bottom tray still makes more sense for heavy power feeders and where you need a solid barrier or cover. Note the 8 inch width here is narrow for a main distribution spine, it suits branch and zone runs.

CE marking is the certification carried on this flex tray. If your project spec calls out a specific NEMA or UL cable tray classification, verify that against the submittal for the run you're building.

The finish is black powder coat, which is the standard look for exposed overhead pathway in data halls and equipment rooms where the tray is meant to disappear against black racks and ceiling. If your existing run is electrozinc or galvanized silver, this section won't match visually, though it splices the same.