You may also like
B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Electroplated zinc galvanized, Steel, 12.2" actual area insid
Model: BLN-FT2X12X10ELG
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 12.2" actual area inside tray, 2" deep flex tray
B-LINE
$757.00
B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Electroplated zinc galvanized, Steel, 71.5" actual area insid
Model: BLN-FT4X18X10ELG
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 71.5" actual area inside tray, 4" deep flex tray
B-LINE
$683.59
B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Electroplated zinc galvanized, Steel, 31.5" actual area insid
Model: BLN-FT4X8X10 ELG
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 31.5" actual area inside tray, 4" deep flex tray
B-LINE
$513.96
B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Electroplated zinc galvanized, Steel, 59.8" actual area insid
Model: BLN-FT2X30X10 ELG
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 59.8" actual area inside tray, 2" deep flex tray
B-LINE
$812.51
B-Line Eaton series Flex tray wire basket tray, Controlled interior reended application, Electroplated zinc galvanized, Steel, 31.8" actual area insid
Model: BLN-FT2X16X10 ELG
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 31.8" actual area inside tray, 2" deep flex tray
B-LINE
$593.69
Eaton B-Line series Flex tray wire basket tray, Controlled interior recommended application, Electroplated zinc galvanized, Steel, 39.7" actual area inside tray, 2" deep flex tray
Manufacturer Resources
Product Specs
- Application:
- Controlled interior recommended application
- Certifications:
- CE
- Product Height:
- 2.38 in
- Product Length Depth:
- 118.312 in
- Product Weight:
- 20.4 lb
- Product Width:
- 20 in
- Special Features:
- 39.7" area inside tray
- Department:
- Electrical
- Product Type:
- 2" deep flextray
- Product Finish:
- Electro-plated
- Product Details:
- 2" deep flextray
- Product Material:
- Steel
- Product Length:
- 118.312 in
B-LINE FT2X20X10 ELG – Frequently Asked Questions
1) Is the Eaton B-Line FT2X20X10 ELG wire basket tray rated for outdoor or corrosive locations?
No. The FT2X20X10 ELG is an electroplated zinc galvanized steel tray, and electroplated zinc is a controlled interior finish only. Eaton lists it for controlled interior recommended application, so dry, conditioned indoor runs (data rooms, IDF closets, above ceilings in occupied space). For loading docks, parking garages, wash-down areas, or anything exterior, step up to a hot dip galvanized after fabrication or stainless version of the flextray instead.
2) What is the usable cable fill width on the 20 inch B-Line flextray, and what does the 39.7 inch figure mean?
Nominal width is 20 inches with 2 inch deep side wires, and the published usable figure is 39.7 square inches of actual area inside the tray. That area number, not the nominal width, is what you use for cable fill calculations. Bear in mind the 20 inch nominal is the tray dimension, so allow for it when laying out trapeze or wall bracket spacing and when checking clearance to structure above.
3) What exact part number do I order for the 2 inch by 20 inch electroplated B-Line flextray?
Order Eaton B-Line part number FT2X20X10 ELG. The code reads as flextray, 2 inch depth, 20 inch width, 10 foot length, ELG for electroplated zinc galvanized finish. One part number covers the section as supplied.
4) Does the Eaton B-Line flextray carry any listings or certifications I can put on a submittal?
The FT2X20X10 ELG is CE marked. That is the certification Eaton publishes for this part, so it is what goes on the submittal for this line item.
5) Will the electroplated zinc flextray match the pre-galvanized tray already installed in our building?
Close, but not identical. Electro-plated zinc gives a bright, smooth silver finish and is intended for the same controlled interior service as pre-galvanized tray, so it will splice into an existing interior run and read as a visual match in a ceiling or telecom room. If your existing tray is hot dip galvanized after fabrication, the heavier, duller spelter coating will look noticeably different where the two meet.
How fast can I get the B-LINE FT2X20X10 ELG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT2X20X10 ELG come with a warranty?
Absolutely. The B-LINE FT2X20X10 ELG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT2X20X10 ELG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT2X20X10 ELG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.