B-Line Eaton series Flex tray wire basket tray, Food preparation and wash down areas applications, Stainless steel type 304, Steel, 47.3" actual area

Yes. The Eaton B-Line Flex Tray FT6X8X10304SS is specified for food preparation and wash down area applications, and it is type 304 stainless steel, which is why it holds up to repeated washdown and sanitizing where painted or plated tray would not.

The tray measures 6.38 in height, 8 in width and 118.312 in length, and it is a 6 inch deep flex tray. Usable fill area inside the tray is 47.3 square inches, which is the number to work from when you calculate cable fill for your run.

Wire basket tray like the FT6X8X10304SS is the open type: it drains and it can be washed through, which is why it is specified for food prep and wash down areas. Solid bottom or ventilated trough tray collects water and debris and is harder to clean, so it makes more sense in dry electrical rooms or where you need the cable shielded from falling material. Over a cook line or in a wash bay, open basket in 304 stainless is the type to run.

Material is steel with a type 304 stainless steel designation, so it is a stainless wire basket rather than a zinc or pre-galvanized tray. That matters in a washdown space, where a plated or painted finish will fail at the weld points and cut edges first.

What you are ordering under FT6X8X10304SS is the tray section itself, a 6 inch deep wire basket in 304 stainless. Splice plates, trapeze or wall bracket supports, and any drop-out or cover pieces are separate line items, so build them into the takeoff along with the tray count.

Order Eaton B-Line part number FT6X8X10304SS. It is a single model, 6 inch deep by 8 inch wide, 304 stainless, and there are no finish or length options to specify with it.

CE is the mark carried on this Eaton B-Line flex tray. If your facility spec calls for a particular listing beyond that, verify it against the run submittal before you release the order.