You may also like
Eaton B-Line series Flextray wire basket tray, Install on wire ends if required, Steel, Rubber cap
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Diameter:
- .236 in
- Product Height:
- .236 in
- Product Weight:
- .2 lb
- Special Features:
- Install on wire ends if required
- Department:
- Electrical
- Product Type:
- Rubber cap
- Product Details:
- Rubber cap
- Product Material:
- Steel
B-LINE B719EB – Frequently Asked Questions
1) What is the Eaton B-Line B719EB rubber cap used for on Flextray wire basket tray?
It's an end cap for cut wire ends on Eaton B-Line Flextray wire basket cable tray. When you field-cut a section of basket tray, the wires are left with exposed cut ends; the B719EB slips over those ends to cover them. Eaton lists it as install on wire ends if required, so it's used where cut ends are exposed rather than on every wire of every run.
2) What size wire does the B-Line B719EB cap fit?
The cap is listed at .236 inch diameter and .236 inch height, so it's sized for the Flextray basket wire of that gauge. Measure the cut wire on your tray before ordering in bulk, because Flextray is built in several wire diameters and a cap sized to .236 in will not stay on a heavier wire.
3) Is the B-Line B719EB tray end cap UL listed or CSA compliant?
It carries a UL Classified marking and CSA compliance. For an inspector looking at a cable tray installation, that covers the cap as part of the Flextray system rather than as a standalone electrical device.
4) Do I need end caps after cutting Flextray basket tray to length?
Only where the cut ends are exposed and could snag cable or an installer's hand. Eaton's guidance on the B719EB is to install on wire ends if required, so a run that terminates inside a coupling or against a wall generally doesn't need them, while an open cut end in a walkable or cable-pulling path does.
5) What is the Eaton part number for the Flextray wire end cap?
B719EB is the Eaton B-Line part number, sold as a single model with no finish or size options. That's the number to put on a purchase order or a submittal for Flextray end protection.
6) Is the B719EB cap rubber or steel?
The catalog record is mixed on this point in a way worth knowing before you order: the part is described as a rubber cap while the material field reads Steel. If your spec calls for a non-metallic cable-protection cap, confirm the material against the Eaton part sheet for B719EB before committing a large quantity.
How fast can I get the B-LINE B719EB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B719EB come with a warranty?
Absolutely. The B-LINE B719EB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B719EB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B719EB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.