B-Line Eaton series free standing enclosure accessories, 12, Serves as barrier when used with additional gasket, Fits enclosures 72" X 18", Modular f

It is sized for Eaton B-Line modular free-standing enclosures measuring 72 inches by 18 inches. The plate itself is 72 in high, 18 in wide, and 2.5 in deep, so it matches the frame face of that enclosure size only. If your frame is a different height or depth, it is the wrong end plate.

Yes. The M7218-12FEK is rated NEMA 12 and is UL Listed, and the product data calls it Type 12/13. That makes it suitable for indoor industrial lineups where the requirement is protection against falling dirt, circulating dust, and dripping non-corrosive liquids, not washdown or outdoor use.

It weighs 82.42 lb, and at 72 inches tall it is a two-person lift. Budget rigging or a second set of hands when you close out the end of a free-standing lineup, and stage it before the enclosure is loaded with gear.

The ordering part number M7218-12FEK is an end plate kit for Eaton B-Line modular free-standing enclosures. It closes off the end of a bayed enclosure lineup; with gasket added it acts as a barrier between sections. Our record also tags it under cooling and ventilation, so if you are looking for a fan filter assembly rather than an end closure, this is not that part.

Between two bayed sections you only need it if you want a barrier separating the two compartments, and in that case add the gasket so the separation actually seals. On the open end of a lineup, the end plate is what closes the frame off. Either way it has to be the 72 in x 18 in size to match the enclosure.