B-Line Eaton series Grip Strut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$611.44

B-Line Eaton series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gaug

(No reviews yet) Write a Review

Model: T51514 36 GL
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$611.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 11.75" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Stair tread, 14 gauge steel

Manufacturer Resources

Product Specs

Application:
Safe, sturdy footing where non-slip is required
Channel Size:
1.5"
Compliances:
OSHA Compliant
Material Gauge:
14 gauge
Product Height:
1.5 in
Product Length Depth:
432 in
Product Weight:
4.2 lb
Product Width:
11.75 in
Department:
Electrical
Product Finish:
Mill-galvanized
Product Material:
Steel
Product Length:
432 in

B-LINE T51514 36 GL – Frequently Asked Questions

1) What width and channel depth does the B-Line Grip Strut stair tread cover, and will it fit my stair stringers?
The Grip Strut tread measures 11.75 inches across the grating width with a 1.5 inch channel size, and the 1.5 inch channel height is what sits in the stringer. Length is listed at 432 inches. Measure your stringer-to-stringer span and your tread nosing-to-back depth against those numbers before you commit, since the channel depth sets how the tread sits on the angle supports.
2) Is Grip Strut stair tread OSHA compliant for an industrial stairway?
Yes. The Eaton B-Line Grip Strut stair tread is listed as OSHA compliant, and it is built as a non-slip walking surface for stairs where sure footing is required. That is the reason it gets specified on plant catwalks, mezzanine stairs, and rooftop access runs rather than plain plate.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
The finish is mill-galvanized steel, which is a zinc coating applied to the coil before forming. That handles normal outdoor weather and damp industrial interiors. Keep in mind the sheared and punched edges created during fabrication are not re-coated, so in salt spray, chemical wash-down, or constantly wet service a hot-dip galvanized or stainless tread is the better call.
4) How heavy-duty is 14 gauge Grip Strut, and is it stiff enough for a stair tread?
It is formed from 14 gauge steel, the heavier of the two common Grip Strut thicknesses, and the 1.5 inch channel depth is what carries the load rather than the sheet thickness alone. Product weight is listed at 4.2 lb. For pedestrian stair traffic in a plant or on a mezzanine, 14 gauge at a 1.5 inch channel is the standard industrial specification.
5) Does the Grip Strut stair tread come with mounting hardware or end plates?
What ships is the tread itself in mill-galvanized 14 gauge steel. Bolts, nuts, and any end plates or carrier angles needed to attach it to your stringers are separate items, so add fasteners to the order if your stair does not already have them in place from a previous tread.
6) Should I use Grip Strut plank or stair tread for a mezzanine walkway?
Stair tread is the right pick for the risers of a stairway, where each piece spans between stringers and provides the stepping surface. For a flat walkway, catwalk, or mezzanine deck you want Grip Strut plank or grating in a continuous run instead. Both share the same non-slip diamond-punched surface, so the walking feel matches across a stair and the platform it lands on.
How fast can I get the B-LINE T51514 36 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE T51514 36 GL come with a warranty?
Absolutely. The B-LINE T51514 36 GL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE T51514 36 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE T51514 36 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.