B-Line Eaton series Grip Strut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$513.07
B-Line Eaton series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Plain, Stair tread, 14 gauge

B-Line Eaton series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Plain, Stair tread, 14 gauge

(No reviews yet) Write a Review

Model: T41514 36 BL
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$513.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Grip Strut stair tread, 432" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Plain, Stair tread, 14 gauge

Manufacturer Resources

Product Specs

Application:
Safe, sturdy footing where non-slip is required
Channel Size:
1.5"
Compliances:
OSHA Compliant
Material Gauge:
14 gauge
Product Height:
1.5 in
Product Length Depth:
432 in
Product Weight:
3.6 lb
Product Width:
9.5 in
Department:
Electrical
Product Finish:
Plain
Product Material:
Steel

B-LINE T41514 36 BL – Frequently Asked Questions

1) What size opening does the B-Line Grip Strut stair tread cover?
The Grip Strut stair tread measures 9.5 in wide by 432 in in stated length, with a 1.5 in channel size and 1.5 in height. Measure your stringer-to-stringer run and tread depth against those figures before ordering, since the tread depth is fixed at 9.5 in and cannot be trimmed narrower without losing the formed channel edge.
2) Is this Grip Strut stair tread OSHA compliant for an industrial stair?
Yes. The B-Line Grip Strut stair tread is listed as OSHA compliant, and it is a serrated-surface tread intended for safe, sturdy footing where non-slip is required, which is the usual reason it gets specified on plant stairs, catwalk access, and mechanical platform runs.
3) Does the plain finish on this steel stair tread need painting or galvanizing for outdoor use?
The finish is Plain, meaning bare steel with no protective coating. On an interior dry stair that is fine, but for an exterior stair, a wash-down area, or anywhere with chemical exposure, bare steel will corrode and you should either field-coat it or specify a galvanized Grip Strut tread instead.
4) Is 14 gauge heavy enough for a stair tread on a plant walkway?
14 gauge steel is the lighter of the common Grip Strut tread thicknesses and suits normal foot traffic on access stairs, ladders, and platforms. If your stair sees heavy loads, carts, or long unsupported spans between stringers, step up to a heavier gauge or a deeper channel rather than this 1.5 in, 14 gauge profile.
5) Does the Grip Strut stair tread come with mounting hardware or end plates?
No fasteners or end plates are included. The tread is supplied as the formed steel grating section only, so plan on bolts or welded clips and, where your stair design calls for them, separate carrier or nosing plates to attach it to the stringers.
6) How heavy is a Grip Strut stair tread to handle on site?
Listed weight is 3.6 lb, so a single tread is a one-hand carry up a ladder. That is one of the reasons crews use Grip Strut for retrofit stair work: treads can be set and bolted without lifting gear, unlike cast or heavy bar grating.
7) Can I use this tread for a walkway or platform instead of a stair?
It is built as a stair tread, with the 9.5 in width sized to a tread run rather than a walkway panel. You can use sections on a small platform or ladder rung application where the 9.5 in width and 1.5 in channel work out, but for a continuous floor or catwalk deck, use plank or panel Grip Strut in the appropriate width instead.
How fast can I get the B-LINE T41514 36 BL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE T41514 36 BL come with a warranty?
Absolutely. The B-LINE T41514 36 BL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE T41514 36 BL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE T41514 36 BL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!