B-Line Eaton series ground mounted panel enclosure, 72" height, 12" length, 60" width, 4X, Hinged cover, ES4XS enclosure, Ground mount, Large double

Yes. The ES4XS enclosure carries a NEMA 4X rating and is built from 304 stainless steel with a closed cell neoprene gasket, so it handles hosedown, corrosion, and wet outdoor duty. The 12 gauge body and #4 brushed finish are what you want for food plants, water treatment, car washes, and salt air sites.

It measures 72 inches high, 60 inches wide and 12 inches deep. That 12 inch depth is the number to check first: deep breakers, wireway, or rear-projecting devices can run out of room before the 72 x 60 door face does.

It is a ground mount design, meant to sit on a pad or floor stand rather than hang off a wall or strut. At 500.8 lb empty it needs rigging or a lift to set, and the pad has to be poured and anchored before delivery. If you need a wall hung box, this is the wrong style.

Large double door style with hinged covers and a stainless handle running 3-point latching, so the door pulls tight top, middle and bottom against the gasket. Security is a key lock with padlock provision, which is what most utility and municipal specs call for on an outdoor cabinet.

You can, but every penetration has to be made with 4X rated hubs or fittings and sealed, or the rating is gone. The box ships with no mounting provisions and no factory knockouts, so all entries are field cut, and bottom or side entry is usual on a ground mounted cabinet. Deburr and passivate cut edges on 304 stainless to keep corrosion from starting at the hole.

The part number is ES-726012-4XS from Eaton B-Line. The digits read as the size: 72 high, 60 wide, 12 deep, with 4XS for NEMA 4X stainless. Specify it that way and you get the large double door, hinged, 304 stainless version.