You may also like
B-Line BKF100-6 Eaton series hanging system, Can installin existing anchors or metal brackets, KwikWire hanger, Ideal for supporting light fixtures, HVAC duct, 1/16" wire max, 6" wire length
Model: BLN-BKF100-6
Eaton B-Line series hanging system, Can installin existing anchors or metal brackets, KwikWire hanger, Ideal for supporting light fixtures, HVAC duct, 1/16" wire max, 6" wire length
B-LINE
$71.25
$29.23
B-Line Eaton series hanging system, Angle bracket termination or a ready to use kit, KwikWire angle bracket termination Kit, Angle bracket termination
Model: BLN-BKA-063-80K
Eaton B-Line series hanging system, Angle bracket termination or a ready to use kit, KwikWire angle bracket termination Kit, Angle bracket termination, 1/16" wire max, 80" wire length
B-LINE
$67.80
$23.39
B-Line Eaton series hanging system, Angle bracket termination or a ready to use kit, KwikWire angle bracket termination, Angle bracket termination, 1/
Model: BLN-BKA-063-120
Eaton B-Line series hanging system, Angle bracket termination or a ready to use kit, KwikWire angle bracket termination, Angle bracket termination, 1/16" wire max, 120" wire length
B-LINE
$62.39
$17.53
Eaton B-Line series hanging system, Can installin existing anchors or metal brackets, KwikWire hanger, Ideal for supporting light fixtures, HVAC duct, 1/16" wire max, 4" wire length
Manufacturer Resources
Product Specs
- Application:
- Can install in existing anchors or metal brackets
- Certifications:
- cULus Listed
- Product Diameter:
- .5 in
- Product Height:
- .43 in
- Product Weight:
- 1.152 lb
- Special Features:
- Ideal for supporting light fixtures,HVAC duct
- Wire Diameter Max:
- .062 in
- Wire Length:
- 4 in
- Department:
- Electrical
- Product Model:
- KwikWire hanger
B-LINE BKF100-4 – Frequently Asked Questions
1) What is the Eaton B-Line BKF100-4 KwikWire hanger used for?
It is a wire rope hanging system component used to suspend light fixtures and HVAC duct from overhead structure. The BKF100-4 comes with a 4 inch wire length and installs into existing anchors or metal brackets, so you can hang from hardware that is already in the deck or structure rather than drilling new points.
2) What size wire does the BKF100-4 KwikWire hanger accept?
The hanger takes wire up to .062 inch (1/16 inch) diameter. Anything heavier than 1/16 inch wire rope will not pass through it, so match your cable to that maximum before ordering.
3) Can I use the KwikWire BKF100-4 with anchors already installed in my deck?
That is exactly what it is built for. The BKF100-4 installs into existing anchors or metal brackets, which is the common case on a retrofit where the original support points stay and only the fixture or duct changes.
4) Is the B-Line KwikWire hanger listed for electrical use?
Yes, the KwikWire hanger is cULus Listed, which covers it for use in both US and Canadian jurisdictions. That listing is the one inspectors typically look for on suspended fixture support hardware.
5) How much room does the BKF100-4 hanger body take up at the attachment point?
The hanger body is .5 inch in diameter and .43 inch high, so it fits tight against the anchor or bracket without adding much stack height. Useful when you are working in a plenum or a tight ceiling cavity where drop length is limited.
6) Is a 4 inch wire length enough, or do I need a longer KwikWire drop?
Four inches is the wire length on the BKF100-4, so it is a short drop suited to hanging close to the structure, such as a fixture tight to deck or a duct hanger with minimal offset. If your fixture needs to sit a foot or more below the structure, you need a longer wire length version of the KwikWire system instead.
7) What is the part number and weight for ordering the B-Line KwikWire hanger?
Order it as Eaton B-Line MPN BKF100-4. Shipping weight on the item is 1.152 lb.
How fast can I get the B-LINE BKF100-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BKF100-4 come with a warranty?
Absolutely. The B-LINE BKF100-4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BKF100-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BKF100-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.