B-Line Eaton series open racks, 102.375" height, 3" length, 2.625" width, Aluminum, RCM rack mounted vertical cable manager double sided, Direct pdu

The SB86286D108EW manager stands 102.375 inches tall, which is taller than a standard 84 inch (7 foot) rack. It is built for taller open frame racks, so measure your frame height before ordering. Footprint is narrow: 2.625 inches wide by 3 inches deep.

Mounting is direct PDU mounting, so the manager attaches to the PDU mounting position rather than consuming rail U space. That keeps the 3 inch deep channel alongside the rack while leaving the equipment rails clear.

Double sided. The RCM rack mounted vertical cable manager routes cable on both front and rear, and routing is unrestricted front to rear, so you can pass patch cords between the equipment face and the rear switch side without leaving the channel.

This one is sized for lower density work: it carries a low density plastic gate and is intended for routing lower density cabling between racks. At 2.625 inches wide by 3 inches deep it suits patch runs between adjacent frames, not a high count fiber or copper trunk aggregation channel. For dense cross-connect fields, step up to a wider high capacity vertical manager.

The body is aluminum with an Eaton white powder coat and plastic components, finished white. It matches Eaton white rack frames in the same room, which matters if you are standardizing a data closet build.

Yes, the SB86286D108EW carries a UL certification, which is typically what a facility or institutional spec calls for on rack accessories.

Order Eaton B-Line part number SB86286D108EW. That is the 102.375 inch double sided RCM vertical manager in white with the low density plastic gate and direct PDU mounting.

It weighs 27.3 pounds over a 102.375 inch length. Awkward more than heavy, so plan on two people to hold it plumb against the frame while the PDU mounting points are fastened.