You may also like
Eaton B-Line series open frame racks, 11 Gauge steel, Junction plates: 6, Yellow zinc, End duct finishing panel assembly
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 84 in
- Product Length Depth:
- 5 in
- Product Weight:
- 59 lb
- Product Width:
- .13 in
- Department:
- Electrical
- Product Model:
- End duct finishing panel assembly
- Product Finish:
- Yellow zinc chromate
- Product Material:
- Steel
B-LINE SB5581084YZ – Frequently Asked Questions
1) What exactly is the B-Line SB5581084YZ end duct finishing panel assembly used for?
It's a finishing panel assembly that closes off the exposed end of a cable duct run on Eaton B-Line series open frame racks. Fabricated from 11 gauge steel with six junction plates, it caps the duct end so the runway looks finished and the duct interior is enclosed. It is a duct accessory, not a rack frame, so it does not add mounting space for equipment.
2) What size is the SB5581084YZ end duct panel, and will it span a full-height rack run?
The assembly measures 84 in in height and 5 in in depth, with a .13 in panel thickness, so it covers an 84 inch tall duct end, which is the common full-height dimension for open frame rack runs. If your duct end is shorter or taller than 84 inches, this is the wrong length.
3) Is the yellow zinc finish on this B-Line duct panel suitable for an outdoor or wet location?
The finish is yellow zinc chromate, which is a plated finish intended for dry indoor environments such as telecom rooms, data centers and electrical rooms. For exterior or washdown areas you want a finish specified for that exposure rather than zinc chromate plating.
4) What part number do I order for the yellow zinc 84 inch B-Line end duct finishing panel?
Order Eaton B-Line part number SB5581084YZ. That number covers the 11 gauge steel end duct finishing panel assembly with six junction plates in the yellow zinc chromate finish, 84 in tall by 5 in deep.
5) Does the B-Line SB5581084YZ duct panel carry a UL listing or other certification?
The end duct finishing panel assembly is supplied as a steel enclosure accessory with no certification applicable to it. If your specification calls for a listed assembly, that listing will come from the duct or rack system it is installed on, not from the finishing panel.
6) Is 11 gauge steel heavy enough for a duct end panel in a busy data center?
11 gauge is a structural sheet thickness, well above the light sheet used for cosmetic covers, and the panel measures .13 in thick. For a runway end in a trafficked equipment room it resists knocks from carts and ladders without denting the way thinner panels do.
How fast can I get the B-LINE SB5581084YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5581084YZ come with a warranty?
Absolutely. The B-LINE SB5581084YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5581084YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5581084YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.