Eaton B-Line series open frame racks, 12 Gauge steel, Framing clips and hardware included, Supports frame size 2" X 3/8", Yellow zinc, Crossover framing clip
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .88 in
- Product Length Depth:
- 1.5 in
- Product Weight:
- .13 lb
- Product Width:
- 1.5 in
- Department:
- Electrical
- Product Model:
- Crossover framing clip
- Product Finish:
- Yellow zinc chromate
- Product Color:
- Red
- Product Material:
- Steel
B-LINE SB114BYZ – Frequently Asked Questions
1) What size channel does the B-Line SB114BYZ crossover framing clip fit?
The SB114BYZ crossover clip is made for B-Line open frame rack framing members sized 2 inches by 3/8 inch. If your rack uprights or channel are a different profile, this clip will not seat correctly.
2) Do I need to buy separate bolts and nuts for the B-Line framing clips?
No. The B-Line Eaton series framing clips ship with the mounting hardware included, so you are not sourcing bolts and nuts separately to land the clip on the frame.
3) Is the B-Line crossover framing clip OK for damp or unconditioned electrical rooms?
It is steel with a yellow zinc chromate finish, which is a sacrificial plating suited to dry indoor equipment rooms and similar protected spaces. For genuinely wet or corrosive locations you want stainless or hot dip galvanized hardware instead.
4) How much room does the SB114BYZ clip take up on the rack frame?
Small footprint: 1.5 in by 1.5 in with a height of .88 in, and it weighs .13 lb. That matters when you are stacking clips close together along a run or figuring the clearance behind a rack against a wall.
5) What is a crossover framing clip actually used for on an open frame rack?
A crossover clip joins two framing members where they cross, rather than end to end. On a B-Line open frame rack that is how you tie a horizontal brace or ladder rack runway to the vertical frame. If your joint is a butt or right angle splice at a member end, you need a different clip in the series, not the crossover.
6) How heavy is the steel on the B-Line open rack framing clips?
The B-Line Eaton series open rack framing components are 12 gauge steel, which is the load carrying thickness you want for cable runway and equipment rack bracing rather than light sheet metal accessory brackets.
How fast can I get the B-LINE SB114BYZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB114BYZ come with a warranty?
Absolutely. The B-LINE SB114BYZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB114BYZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB114BYZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.