Eaton B-Line series open frame racks, 14 Gauge steel, (4) #12-24 Bolts and nuts, Used for protection of back side of rack, Telco gray powder coat, Rear bumper rail - network bay
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1 in
- Product Length Depth:
- 2 in
- Product Weight:
- 2.8 lb
- Product Width:
- 21.19 in
- Department:
- Electrical
- Product Model:
- Rear bumper rail - network bay
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
B-LINE SB592319X2TG – Frequently Asked Questions
1) Does the B-Line SB592319X2TG bumper rail come with the mounting hardware, or do I have to order bolts separately?
Mounting hardware is included. The rail ships with four #12-24 bolts and nuts, which is the standard rack thread on B-Line open frame racks, so nothing else has to be ordered to hang it on the rear of the bay.
2) Will a 21.19 inch wide rear bumper rail fit a standard 19 inch open frame rack?
Yes. The rail measures 21.19 inches across, which spans the outside of the uprights on a standard 19 inch B-Line open frame rack rather than the 19 inch panel opening itself. It bolts through the rear flanges of the frame using the supplied #12-24 hardware. Section size is 2 by 1 inch.
3) What is the Eaton B-Line SB592319X2TG rear bumper rail actually used for on an open frame rack?
It is a rear bumper rail for Eaton B-Line series open frame relay racks and network bays, mounted across the back of the rack to protect the rear side of the rack and the equipment and cabling behind it. It is a protective rail only, not a structural upright or a mounting rail for rack units.
4) What gauge and finish is the B-Line rear bumper rail, and will it match my existing gray racks?
The rail is formed from 14 gauge steel with a telco gray powder coat, the same finish B-Line uses across its open frame rack line, so it matches existing telco gray bays and cable management in a data room or MDF.
5) What part number do I order for the B-Line telco gray rear bumper rail?
Order Eaton B-Line part SB592319X2TG. It is a single configuration, telco gray powder coat, 14 gauge steel, supplied with four #12-24 bolts and nuts, so there is no finish or length option to specify.
6) How much does the SB592319X2TG rear bumper weigh, and can one person install it?
At 2.8 pounds it is a one-person install. Hold the rail against the rear flanges of the rack uprights and run the four supplied #12-24 bolts and nuts through. Its light weight also means it adds almost nothing to the seismic or floor loading calculation on a loaded bay.
How fast can I get the B-LINE SB592319X2TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB592319X2TG come with a warranty?
Absolutely. The B-LINE SB592319X2TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB592319X2TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB592319X2TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.