B-Line Eaton series open racks, 14 Gauge steel, Mounting hardware, Fits rack height of: 108", Flat black powder coat, Used with , , cable managers,

It's the removable back cover panel for an Eaton B-Line RCM vertical cable manager, not the cable manager itself. It closes off the rear of the manager channel and ships with mounting hardware. If you need the vertical manager body, order the SB860, SB862, or SB864 manager it goes with.

No. The SB862BRC6108FB is sized for 108 inch rack height, a 9-foot frame. A 7-foot (84 inch) rack needs the cover length matched to that height, so this one will overshoot by two feet.

It mounts to the SB860, SB862, and SB864 vertical cable managers in the Eaton B-Line open frame rack line. It is cut for the 108 inch height version of those managers.

UL Listed, per the product record. That is the detail most institutional and government spec reviewers want confirmed before a telecom room submittal goes through.

Mounting hardware comes in the box. At 6.4 lb for a 108 inch panel it is a one-person install, though a second set of hands helps when you are lining up a 9-foot length on a loaded rack.

A back cover closes the rear of the vertical channel so cable bundles stay in the manager instead of bowing out behind the rack, which matters when the rack sits back-to-back with another row or against a wall. Because it's removable, you still get full access for re-dressing cable later. It's the SB860, SB862, and SB864 managers this one is built for.

SB862BRC6108FB is the Eaton B-Line part number, 108 inch, flat black powder coat. It's a single configuration, so there is no separate finish or size to specify on the order.

14 gauge steel with a flat black powder coat, so it matches the standard black B-Line open frame racks and managers rather than contrasting with them.