B-Line Eaton series open racks, 60.375" height, 10.8125" length, 3.625" width, Aluminum, RCM rack mounted vertical cable manager, Direct pdu mounting

It is built for direct PDU mounting, so a rack PDU fastens straight to the manager body without a separate mounting kit. That is the point of the design: the power strip lives in the vertical channel alongside the cable, not in a rack unit of horizontal space.

Yes. The RCM channel allows unrestricted front and rear cable routing, so you can bring patch cords in from the front and run power or trunk cable down the back within the same 3.625 inch wide channel.

The Eaton B-Line RCM vertical cable manager carries UL certification, which is typically what a facility or institutional spec calls for on rack infrastructure. Part number to reference on the submittal is SB86083S066FB.

A vertical manager like the B-Line RCM runs the full side of the rack and carries the bulk of the cable up and down between equipment levels, and it also takes the PDU via direct mounting so it costs you no rack units. Horizontal managers are for the short slack jumps between a patch panel and the switch directly above or below it. Most builds use both, and the RCM family also includes an extended horizontal cable manager if you need that piece.

The body is aluminum with a flat black powder coat, and the cable fingers and other components are black plastic. It matches standard flat black rack frames, so it blends into a row of existing black open racks rather than standing out.

The design uses high density plastic fingers along the channel, which retain cable bundles at close intervals and let you drop a patch cord in or pull it out without cutting ties. Useful when you are re-patching frequently instead of doing a one-time build.