B-Line Eaton series open racks, 60.375" height, 17.875" length, 3.625" width, Aluminum, RCM rack mounted double sided vertical cable manager cover, D

The B-Line Eaton series cable manager measures 60.375 inches in height, 17.875 inches in length/depth and 3.625 inches in width. The 3.625 inch width is the footprint alongside the rack rails, so plan for roughly 3-5/8 inches of side clearance between adjacent racks or the cabinet wall, and a 60-3/8 inch vertical run of open frame to mount against.

Yes. The manager is built for direct PDU mounting, so a vertical power strip can be attached inside the channel rather than eating rack units in the EIA space. That is the usual reason to pick this one over a plain finger duct in a high density cabinet.

Cable is retained by low density plastic gates rather than a hinged solid door. The gates flex open for cable entry and close back over the bundle, which suits moves-adds-changes work where you are repeatedly pulling patch cords in and out. Note that the required number of gates and the mounting hardware are specified separately, so confirm you are ordering enough gates to cover the full 60-3/8 inch height.

Yes, two things are called out as separate items: the gates and the mounting hardware. The cover itself is the aluminum channel body. Budget the gate count against the 60.375 inch height of the channel so the full run is enclosed, and get the mounting hardware in the same order rather than discovering it missing on install day.

It is a double sided rack mounted vertical cable manager (RCM) cover, so it manages cable on both the front and rear faces of the rack from a single assembly. That is the configuration to use when you are dressing both patch cabling at the front and equipment or power cabling at the rear of a two-post open frame rack.

No, not in colour. The body is silver powder coat over aluminum, with black plastic components for the gates. If the room is standardized on black equipment racks and black vertical managers, this one will read as a mismatch down the row. Match on colour if appearance in a customer-facing or glass-front data room matters; if it is a back-of-house MDF closet, the silver finish is only cosmetic.

UL is the certification carried on this Eaton B-Line vertical cable manager. That is the line item an institutional or government spec writer usually needs to see before it goes into a facility submittal.

Order it by MPN SB86483D066SL from Eaton's B-Line series open frame rack line. That number covers the silver 60.375 inch high double sided RCM cover with direct PDU mounting and low density plastic gates.

It comes in at 17.875 lb, so a single installer can handle the channel, though at 60-3/8 inches tall it is easier to align to the rack rails with a second set of hands holding the top while the lower fasteners go in.