B-Line Eaton series open racks, 60.375" height, 7" length, 10" width, Aluminum, RCM rack mounted vertical cable manager single sided, Direct pdu moun

The Eaton B-Line RCM vertical cable manager, part SB862810S066SL, stands 60.375 inches tall, which corresponds to roughly 34 rack units of usable vertical height. On a taller open frame rack it covers only part of the frame, so measure the frame height you need managed before ordering. It is built for open frame rack mounting, not for enclosed cabinets with side panels.

It is a single sided RCM rack mounted vertical cable manager, so cable is retained on one face of the manager. The design does allow front and rear routing of cable within that single sided section, which is what most two-post open frame installs need where patch cords come forward and equipment cords drop to the rear. If you want managed fingers on both faces of the same channel, a single sided unit is the wrong choice.

The channel measures 10 inches wide by 7 inches deep. That 10 inch width is what determines whether it fits the gap you have between racks or at the end of a row, and the 7 inch depth sets how far it projects along the rack. Confirm both against your aisle layout, because a 10 inch channel bolted between two racks widens the whole bay by that amount.

Yes. Direct PDU mounting is the mounting method for this B-Line RCM manager, so a vertical power strip attaches into the channel rather than needing separate brackets on the rack rail. That is the usual reason to pick this variant over a plain cable channel: power and data share the same vertical run.

The unit ships with the vertical cable section and push in fasteners for assembly, so no separate fastener kit is needed for the manager itself. The door is a low density plastic gate. Rack-to-manager attachment hardware should match your frame, so check what your open frame rack uses on its rails.

UL is the certification carried on this B-Line RCM vertical manager, which is typically what a facilities or institutional spec calls for on rack accessories in a communications room. No other rating is carried on it.

No. This one is silver powder coat over aluminum, with black plastic components such as the gate. If your row is all black, the channel will read as a contrast. For a uniform look order a black finish version of the RCM series instead.