B-Line Eaton series open racks, 67.375" height, 21.625" length, 3.625" width, Aluminum, RCM rack mounted vertical cable manager double sided, Direct

It occupies a 3.625 inch wide slot between frames, with a depth of 21.625 inches and a height of 67.375 inches. That 3-5/8 inch width is the number that decides your row layout: measure the gap you have planned between adjacent open frame racks and make sure the aisle math still works after adding it. At 26.5 lb it is a one-person lift onto the rack rails.

Double sided. The RCM rack mounted vertical cable manager routes cable on both the front and rear faces, so patch cords coming off the front of the equipment and the permanent cabling landing at the rear each get their own channel instead of sharing one.

It is built for routing lower density cabling between racks and uses a low density plastic gate on the covers. If you are running a full 48-port panel per RU with heavy patch cord bundles, you want a higher capacity manager. For distribution frames, switch uplinks, and moderate patching, this is the right size.

Yes, it is set up for direct PDU mounting, so a vertical power strip attaches straight to the manager body rather than needing a separate zero-U bracket kit. That keeps the power feed in the same vertical channel as the cabling and off your rack rails.

Push-in fasteners and a cable strap mount ship with the manager. What is not included is the rack itself or the mounting screws for your rails, and any hook and loop or strap material beyond the supplied mount. Order your rack rail hardware and cable ties separately.

It carries a UL certification, which is usually what a facilities or AHJ review is looking for on cable management in a commercial telecom room.

At 67.375 inches of managed height, it covers roughly the 45U of usable mounting space on a standard seven foot open frame rack, stopping short of the full 84 inch overall frame height. If your rack is shorter, or you need cable routing carried past the top of the frame to an overhead ladder tray, plan the transition at the top of the manager.

The frame is aluminum in a flat black powder coat, with black plastic components for the gates and trim. That is the standard black finish used across B-Line open frame rack accessories, so it reads consistent alongside other black powder coat racks in a row. Aluminum also means it is lighter than a steel manager of the same size, at 26.5 lb.