B-Line Eaton series open racks, 67.375" height, 7" length, 6" width, Aluminum, RCM rack mounted vertical cable manager single sided, Direct pdu mount

At 67.375 inches of usable height, the Eaton B-Line RCM vertical manager matches the height of a standard 45U open frame rack upright (45U of rack space is 78.75 inches of EIA rail, but the 67.375 inch body corresponds to the 38U-ish managed section of a two-post frame). Measure your upright from the top rail to the base and confirm you have at least 67-3/8 inches of clear vertical run on the side of the frame before ordering. Overall footprint is 7 inches deep by 6 inches wide.

Single sided. Model SB86286S072FB is the RCM rack mounted vertical cable manager, single sided, so it manages cable on one face of the rack only. If you need to route and separate cable on both the front and rear of a two-post frame, you either need a double sided manager or a second single sided unit on the opposite side.

Yes. It is built for direct PDU mounting, so a vertical rack PDU attaches straight to the manager channel rather than eating rack units in the frame. That is the reason to pick this version over a plain finger duct if you are running a zero-U power strip alongside your data cable.

Cable routes between snap on gates rather than through a solid door. The gates are low density plastic, so you push the bundle in from the side and the gate snaps back over it, which is faster to work in a live rack than unscrewing a full length cover. Black plastic components throughout.

UL is the certification carried on the SB86286S072FB vertical cable manager. For a spec that calls out UL recognized cable management on the drawing, that is the line item it satisfies.

The vertical cabling section is included with the unit, so what arrives is the full 67.375 inch channel with its snap on gates, not a bare bracket kit you finish with add-on sections.

Plan on 6 inches of added width per side and 7 inches of depth. On a 19 inch two-post frame that puts a single sided manager well outside the rails, so check your aisle and any adjacent cabinet before you set the row spacing.

Finish is flat black powder coat with black plastic gates and components, the same finish family B-Line uses across its open frame rack line, so it reads as matched next to existing black two-post frames. If your installed racks are a gloss black or a gray, expect a visible difference in sheen.