B-Line Eaton series open racks, 79.625" height, 1.75" length, 2.625" width, Aluminum, RCM rack mounted vertical cable manager, Direct pdu mounting,in

At 79.625 inches tall, the RCM vertical cable manager matches the height of a full 7-foot (84 rack unit) open frame rack, so it runs the full vertical span beside the rails. It occupies 2.625 inches of width and projects 1.75 inches, so plan that much clear space between racks or at the end of a row.

Yes. The RCM manager is built for direct PDU mounting, so a vertical rack PDU fastens to the manager itself rather than needing separate zero-U brackets behind the rails. That keeps the power strip in the same channel the cabling runs through.

The door uses a quarter-turn locking hinge, so a technician opens the full-height channel with a single twist, no tools and no removing fasteners. Useful in a live rack where you are adding patch cords one at a time.

It is finished in Eaton white powder coat with black plastic components, so it matches other Eaton white-finish open frame rack hardware. The body is aluminum, with high density plastic fingers in black.

No. The SB86083S084EW ships with the vertical cable section and push-in fasteners, with high density plastic fingers as the cable retention. You are adding hardware only if your rack rails require specific mounting screws you do not already stock.

At 2.625 inches wide and 1.75 inches deep, this is a narrow-channel manager suited to patch cord and power cord routing beside a two-post open frame rack, and to rows where floor space between racks is tight. For heavy high-density copper trunks where you are filling every port in a 48-port panel across a full rack, a wider (6 or 10 inch) channel is the better call.

Aluminum body, 15.5 pounds for the full 79.625 inch length. That is light enough for one person to stand up and fasten in place, though a second set of hands helps when aligning a full-height section against the rack rails.