B-Line Eaton series open racks, 84" height, 12.75" length, 6" width, Aluminum, Rack mounted vertical cabling section dual hinging removable, Flat bla

Yes. The B-Line Eaton SB57166D084FB vertical cabling section stands 84 inches tall, which is the same height as a standard 7-foot open frame relay rack, so the manager and rack tops line up when mounted side by side.

Plan on a 6 inch wide gap between racks and 12.75 inches of depth. Those are the footprint numbers for this B-Line vertical cabling section, so if your racks are already bolted down tighter than 6 inches apart, this won't drop in.

The covers on this B-Line section hinge from either side and lift off entirely. That means you can open the channel from whichever aisle you happen to be working in, and pull the cover right off when you're dressing in a large bundle rather than fighting a fixed door.

It's aluminum with a flat black powder coat finish, so there's no bare ferrous surface to rust. That combination also keeps the weight down at 25 pounds, which matters when one person is lifting an 84 inch section into place.

Different jobs. This B-Line section is built for vertical cable management between equipment racks, meaning the trunk runs carrying patch cords up and down between switch and patch panel positions. Horizontal managers handle the short jumper slack at each rack unit. Busy patching walls usually get both, but if your bundles are crossing between two racks, the vertical channel is the piece you need.

Order Eaton B-Line SB57166D084FB. That number covers the 84 inch high, 6 inch wide, 12.75 inch deep rack mounted vertical cabling section with dual hinging removable covers in flat black.

It ships in black with a flat black powder coat, the standard finish on Eaton B-Line open frame racks, so it reads as one assembly rather than a mismatched add-on when you're standardizing a room.

It comes assembled in a protective carton, so it's a mount-and-go item on site rather than a box of panels to build up first.