B-Line Eaton series open racks, 84" height, 6.375" length, 6" width, Rack mounted vertical cabling section dual hinging removable, Telco gray powder

Yes. The SB57166S084TG vertical cabling section is 84 inches tall, which matches a standard 7-foot open frame relay rack. It rack-mounts to the side of the frame and is 6 inches wide by 6.375 inches deep.

Yes. It uses a dual hinging removable gate, so the cover swings open from either side and lifts off entirely. That is the point of the design, you pull the gate off to lay in a full bundle instead of threading cords one at a time, then rehang it.

The section gives you a 6 inch wide by 6.375 inch deep channel running the full 84 inches of the rack. That is the mid-size range for vertical management, appropriate for patch and switch fields with moderate patch cord counts. If you are terminating high-density fiber or copper on every rack unit, plan on a wider channel or a manager on both sides of the frame.

It is rack mounted, not free-standing. The section fastens to an open frame rack upright and has no base or floor mounting of its own, so you need the rack in place first. For runs between racks or from rack to wall, you would use overhead ladder or wire tray instead.

Order Eaton B-Line part number SB57166S084TG. That covers the 84 inch high, 6 inch wide, 6.375 inch deep dual hinging removable vertical cabling section in telco gray.

Grey, in a telco gray powder coat finish, which is the standard color used across telecommunications relay racks and frames. It blends with existing telco gray B-Line open frame racks in the same room.

No. The 84 inch vertical section weighs 8 lb, so one tech can hold it against the rack upright and fasten it. It ships assembled in a protective carton.