B-Line Eaton series open racks, 90.125" height, 14" length, 12" width, Aluminum, RCM rack mounted vertical cable manager double sided, Direct pdu mou

Plan for a footprint of 12 inches wide by 14 inches deep, and 90.125 inches of vertical clearance. That height matches a full-height open frame rack, so if your rack is shorter you will have a manager standing taller than the frame. Measure the aisle space beside the rack for the 12 inch width before you commit, since the manager bolts alongside the rack uprights, not inside them.

It is double sided, with two vertical cabling sections, so front and rear cable paths are kept separate in the same channel. The open back design of the rack family it is built for leaves front and rear access unrestricted, which is what makes running both sides practical.

Yes. The SB862812D096FB is configured for direct PDU mounting, so a vertical power strip fastens straight into the manager channel instead of eating rack units in the frame. That is the reason to pick this version over a plain cable-only channel.

Cable retention is handled by low density plastic gates rather than a hinged solid door. Gates let you push a new run into the channel without swinging a door open, which is what most techs want during moves and adds. The plastic components are black to match the flat black powder coat frame.

Fifty push-in fasteners are included, so you can begin dressing cable as soon as the channel is bolted up. No separate order of retention hardware is needed to get started.

UL is the certification carried on this Eaton B-Line RCM manager, which is usually what an institutional or government spec reviewer is looking for on rack-mounted electrical support products.

Order Eaton B-Line SB862812D096FB. That number covers the 90.125 inch height, 12 inch width, 14 inch depth, double sided RCM configuration with direct PDU mounting and low density plastic gates. Adjacent B-Line numbers change width and gate style, so match the full string when standardizing across a facility.

The body is aluminum with a flat black powder coat finish, and it weighs 26.4 lb. Light enough for one installer to stand it up against the rack, and the aluminum keeps it from being a corrosion problem in humid or coastal equipment rooms.

Finish is flat black powder coat with black plastic gate components, the standard finish on Eaton B-Line open frame racks, so it reads as one assembly next to existing black racks rather than an add-on part.