B-Line Eaton series open racks, 90" height, 84.875" length, 1.5" width, Aluminum, RCM rack mounted vertical cable manager, Rack mounting, Lower densi

Double sided, with a low density plastic gate on each side, so cable can be dropped in and retained from either the front or the rear of the frame without pulling the bundle back out. The gate is plastic; the channel body is aluminum.

It's rack mounted, meaning it bolts to the side of the open frame rack itself rather than standing on its own base or bolting to the floor. Your rack must be secured, since the manager takes its support from the frame.

It's a 1.5 inch wide channel, so it eats very little floor footprint between or beside bays. That narrow width is why it's specified for lower density cable runs rather than a full data center trunk bundle.

Vertical managers such as the RCM run the full height of the frame and carry cable up and down between patch fields, which is where the bulk of your slack lives. Horizontal managers only tidy the jumper run across one or two RU. On an open frame you normally want both, but the vertical channel is what keeps the bundle off the rails. This one is sized for lower density cabling, so for heavy trunk counts step up to a wider high density channel.

Silver powder coat over aluminum, so it matches the standard silver/clear aluminum open frame racks rather than black-finish gear. If your existing racks are black, the color will not match.

UL is the certification carried on the RCM vertical cable manager, which is typically what a facility or government spec calls for on communications rack accessories.

Order it as Eaton B-Line SB86283D090SL, the 90 inch double sided silver RCM vertical cable manager.

At 2.625 lb the aluminum channel is a one-person lift even at 90 inches of length; the difficulty is handling the span, not the weight.