Eaton B-Line series open frame racks, Aluminum, #12-24 mounting hardware, Three mounting spaces required, 100 lb load capacity, Telco gray powder coat, Single sided rack mounted shelf solid shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 5.19 in
- Product Length Depth:
- 10 in
- Product Weight:
- 2.7 lb
- Product Width:
- 18.31 in
- Special Features:
- Three (3) mounting spaces required
- Department:
- Electrical
- Product Model:
- Single sided rack mounted shelf solid shelf
- Product Finish:
- Telco gray powder coat
- Product Material:
- Aluminum
B-LINE SB747V1910ATG – Frequently Asked Questions
1) How much rack space does the B-Line SB747V1910ATG shelf take up in a 19-inch rack?
Three mounting spaces (3U) of rack height are needed for the SB747V1910ATG shelf. Plan for that before you order, because a rack that only has two open spaces between existing gear won't take it. The shelf itself measures 5.19 inches high, 18.31 inches wide, and 10 inches deep.
2) What mounting hardware does the SB747V1910ATG shelf use?
#12-24 mounting hardware, which is the standard thread on Eaton B-Line open frame racks and most tapped-rail relay racks. If your rack uses 10-32 tapped rails or square-hole cage nuts, you'll need the matching screws for that rail instead.
3) Will a 10-inch deep rack shelf hold a typical network switch?
A 10 inch deep shelf suits shallow gear: small unmanaged and edge switches, media converters, modems, fiber terminations, small NVRs. Full-depth servers and deep chassis overhang it and need a four-post or deeper shelf. Measure the footprint of the box you're setting on it against the 18.31 inch width and 10 inch depth.
4) Is this a single-sided or double-sided rack shelf, and does it mount to one pair of rails?
Single sided, solid shelf. It cantilevers off one pair of rack rails, so it works on a two-post open frame rack as well as in a cabinet. The solid deck (rather than vented) means gear that pulls air from the bottom should be spaced above it.
5) Is the B-Line telco gray shelf steel or aluminum, and how much does it weigh?
Aluminum, finished in telco gray powder coat, and it weighs 2.7 lb. The aluminum construction is why one person can hold it in place and start the screws without a second set of hands.
6) Will this shelf match the finish on existing telco gray racks and ladder rack in my IT room?
The finish is telco gray powder coat, the standard color used across Eaton B-Line open frame racks and telecom infrastructure, so it reads as a match to gray racking already in place. Black-finished racks will show a visible difference.
How fast can I get the B-LINE SB747V1910ATG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB747V1910ATG come with a warranty?
Absolutely. The B-LINE SB747V1910ATG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB747V1910ATG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB747V1910ATG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.