Eaton B-Line series open frame racks, Aluminum, Aluminum - brushed, Double sided rack mounted shelf. Heavy duty, solid shelf, Four mounting spaces required, 200 lb load capacity, Shelves and #12-24 mounting hardware included
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 6 in
- Product Length Depth:
- 30 in
- Product Weight:
- 6 lb
- Product Width:
- 19.56 in
- Department:
- Electrical
- Product Model:
- Double sided rack mounted shelf, heavy duty, solid shelf
- Product Finish:
- Brushed aluminum
- Product Material:
- Aluminum
B-LINE SB596S19153AAL – Frequently Asked Questions
1) How much weight can the Eaton B-Line SB596S19153AAL rack shelf hold?
The SB596S19153AAL double sided shelf is rated for a 200 lb load capacity. It is a heavy duty solid shelf (no vents or perforations), so gear sits on a continuous surface rather than spanning rails.
2) How many rack spaces does this B-Line shelf take up in a 19 inch open rack?
Four mounting spaces are required for the SB596S19153AAL shelf, and its overall height is 6 inches. Plan four consecutive RU of free rail before ordering, measured from the rail hole pattern where you intend to mount it.
3) Does the B-Line SB596S19153AAL shelf come with mounting screws?
Yes, #12-24 mounting hardware is included with the shelf, so no separate rack screw pack is needed for installation. Note that #12-24 is the thread used on tapped-rail racks; if your frame is punched for square cage nuts or 10-32, the included screws will not thread in.
4) How deep is this rack shelf, and will it fit in a two-post open rack?
Depth is 30 inches with a width of 19.56 inches, sized for standard 19 inch rack rails. At 30 inches deep it overhangs a two-post frame substantially front and rear, so confirm you have the clear aisle and cable room behind the rack for that projection.
5) Is this shelf steel or aluminum, and how does that affect a corrosive or damp equipment room?
It is aluminum with a brushed aluminum finish, not painted steel. Aluminum does not rust, which is why it gets specified in damp or coastal telecom spaces, and the shelf itself weighs only 6 lb, so a single tech can set it into the rails.
6) Solid shelf or vented shelf for rack mounted gear?
This one is the solid version. A solid deck is the right pick for equipment that does not need bottom airflow, batteries, tools, test sets, wall warts and loose gear, and it doubles as a work surface. If you are stacking heat-producing network or AV gear that relies on convection through the bottom, choose a vented shelf instead.
7) Does the B-Line SB596S19153AAL shelf carry any UL or agency listing?
No agency listing applies to this shelf, it is recorded as Not Applicable for certifications. It is a passive aluminum mounting accessory with no electrical path, so specifiers on institutional jobs typically reference it by part number and load rating rather than a listing.
How fast can I get the B-LINE SB596S19153AAL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB596S19153AAL come with a warranty?
Absolutely. The B-LINE SB596S19153AAL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB596S19153AAL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB596S19153AAL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.