B-Line Eaton series open racks, Aluminum, Flat black, Trays offer top and bottom adjustable cable support, Flat black powder coat, Rack mounted horiz

Yes. The SB81319TT3FB is 19 inches wide, so it mounts horizontally in standard 19 inch open frame rack or cabinet rails. It is a rack mounted horizontal transition tray, meaning it takes up rack space between equipment rather than bolting to the side of the frame.

The tray is 1.5 inches high, which is one rack unit of vertical space, and it projects 3.5 inches deep. Plan one open RU between equipment for it and leave 3-1/2 inches of depth clear behind the rails.

It does. The transition tray offers top and bottom adjustable cable support, so you can route one bundle over the tray and another underneath, and adjust the support to the bundle size instead of cinching everything into a single fixed channel.

Aluminum construction with a flat black powder coat finish, which is the same flat black used across the Eaton B-Line series open frame racks. If your racks are the flat black B-Line frames, the tray matches. Aluminum also keeps the part light at 3 lb, so one person can hold it while starting the screws.

A horizontal transition tray carries cable across the face of the rack at a set elevation and hands it off between vertical managers or overhead tray and the equipment, supporting the bundle top and bottom as it turns. A lacing bar only ties cable back; it does not carry a bundle across the opening or support it on both faces. Use the tray where bundles cross the rack and need to be held at a transition point, and a lacing bar where you just need strain relief behind a panel.

Order Eaton B-Line SB81319TT3FB. That single model covers the 19 inch wide, flat black powder coat aluminum horizontal transition tray, so there are no finish or width options to specify.