Eaton B-Line series open frame racks, Aluminum, Includes #12-24 mounting hardware, Three (3) mounting spaces required, Telco gray powder coat, Single sided rack mounted shelf solid shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 5.19 in
- Product Length Depth:
- 10 in
- Product Weight:
- 2.9 lb
- Product Width:
- 22.31 in
- Special Features:
- Three (3) mounting spaces required
- Department:
- Electrical
- Product Model:
- Single sided rack mounted shelf solid shelf
- Product Finish:
- Telco gray powder coat
- Product Material:
- Aluminum
B-LINE SB747V2310ATG – Frequently Asked Questions
1) How much rack space does the Eaton B-Line SB747V2310ATG shelf take up?
The SB747V2310ATG shelf occupies three mounting spaces, so plan on 3 RU of clear rack face for it. Overall height of the shelf is 5.19 inches, and it mounts on one side of the rack only.
2) Will this B-Line shelf fit a standard 19 inch open frame relay rack?
Yes. At 22.31 inches wide it spans the standard 19 inch rack opening with the mounting flanges landing on the rack uprights, which is how B-Line series open frame racks are laid out. Depth is 10 inches from the rack face, so it suits patch panels, small switches, and modems rather than deep servers.
3) Do I need to buy mounting screws separately for this rack shelf?
No, #12-24 mounting hardware comes with the shelf. That is the thread B-Line open frame racks are tapped for, so nothing else is required to hang it.
4) Is this a vented shelf or a solid shelf?
Solid, not vented. The SB747V2310ATG is a solid single sided rack mounted shelf, so if you are setting gear on it that dumps heat out the bottom, a vented shelf is the better pick.
5) What material and finish is the SB747V2310ATG shelf, and will it match my existing B-Line telco racks?
It is aluminum with a telco gray powder coat, the same gray used across the Eaton B-Line series open frame rack line, so it matches existing telco gray uprights and accessories in an IT room.
6) Can this shelf be mounted in an enclosed cabinet with four post rails?
It is built as a single sided shelf for open frame racks, meaning it fastens at the front rack face only and cantilevers out 10 inches. For a four post cabinet where you want rear support, use a two post cantilever or four post shelf instead.
7) How heavy is this B-Line rack shelf to handle during install?
2.9 pounds. Being aluminum it is a one-hand install, which matters when you are reaching into a loaded open rack to start the four #12-24 screws.
How fast can I get the B-LINE SB747V2310ATG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB747V2310ATG come with a warranty?
Absolutely. The B-LINE SB747V2310ATG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB747V2310ATG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB747V2310ATG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.