B-Line Eaton series open racks, Aluminum, Telco gray powder coat, 12-24 panel mounting holes, 49 mounting spcaes, Customer premise style, Two-post ne

The mounting rails are tapped for 12-24 panel mounting holes, so order 12-24 rack screws and cage-free hardware. 10-32 screws will not thread correctly. If your shop standardizes on 10-32, plan on buying a second box of fasteners for this frame.

49 mounting spaces, which is the usable panel area for switches, patch panels and shelves. That is a full-height telecom frame, so allow ceiling clearance and check that you can walk the frame upright into the room before you commit.

Yes, it is a 19 inch EIA-style open frame, listed at 19 in height and 19 in length/depth with an overall width of 20.3125 in. Standard 19 inch rack-mount patch panels and switches mount to the two uprights. Deep or heavy gear (large UPS units, deep servers) generally wants a four-post rack or cabinet instead, since a two-post frame supports equipment only at the front ears.

UL Listed, which is the line most institutional and MRO specs ask for on open frame telecom racks. Certification is stated on the product record as UL Listed.

The frame is 11 gauge, built to ASTM A1011SS. That is the heavier end of open-rack construction, which matters when you are loading a full 49 spaces of patch panels and switches on a two-post frame.

Order it as Eaton B-Line SB55608419U6TG. That is the single model covered here, in Telco gray with 12-24 tapped rails and 49 mounting spaces.

33 lb for the frame itself. That is a two-person lift to stand it upright and hold it plumb while you anchor it, but it is not a crane item. Floor anchors are what carry the load once equipment goes in.

Telco gray powder coat, the standard color used across carrier and customer premise equipment rooms, so it lines up visually with most existing gray relay racks and cable runway. If your facility standard is black, this frame will not match.