B-Line Eaton series open racks, Aluminum, Telco gray powder coat, Double sided rack mount shelf. Heavy duty, solid shelf, Four mount spaces required,

Four mount spaces are required for the SB596S19106ATG double sided shelf. It stands 6 in tall, so plan on four consecutive rack units of clear space in your open frame rack before you order.

Yes. The shelf is 19.56 in wide, which is the standard 19 inch rack mount footprint including the mounting flanges, and it is built for Eaton B-Line series open frame racks. Depth is 20 in, so confirm you have 20 in of clear projection for a double sided mount.

Mounting hardware is included: the shelf ships with #12-24 mount screws. If your rack rails are tapped 10-32 instead of 12-24, you will need your own screws to match the rail thread.

Double sided means the shelf mounts to both the front and rear rails of an open frame rack, so the load is carried at four points rather than cantilevered off the front. Use it where the equipment is heavy or deep, such as the large monitors this shelf is intended to support. A single sided (front mount only) shelf is fine for light, shallow gear but is not the right choice for a 20 in deep load.

The finish is Telco gray powder coat, the same finish B-Line uses across its open frame rack line, so it matches gray telco rack frames in an equipment room without a color mismatch on the face.

It is a solid, heavy duty shelf, not a vented one. Solid works for monitors and test gear; if you are stacking equipment that dumps heat downward or needs airflow through the shelf surface, a vented shelf is the better pick.

Aluminum construction, 5 lb. That keeps it light enough for one person to hold in place while starting the screws on a four point double sided mount, and it will not rust in a damp equipment closet the way an uncoated steel shelf can.