Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, #12-24 panel mounting holes, Aluminum - brushed, Extra deep wall mount, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 74.25 in
- Product Length Depth:
- 24 in
- Product Weight:
- 25.4 lb
- Product Width:
- 74.25 in
- Department:
- Electrical
- Product Model:
- Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
- Product Finish:
- Brushed aluminum
- Product Material:
- Aluminum & steel
- Product Length:
- 24 in
B-LINE SB704237424AL – Frequently Asked Questions
1) How deep does the SB704237424AL wall mount rack stand off the wall, and will a deep switch fit?
Depth is 24 inches, which is the extra deep version of the open frame wall mount. That clears most deep network switches and short-depth servers front to back, but check your stud spacing and the swing of any front-mounted door or cabinet nearby before committing to a wall location.
2) How much wall height do I need for the B-Line open frame wall mount rack?
Plan for 74.25 inches of clear wall height. That is over six feet, so in a closet with a low ceiling or a soffit you will run out of room. The frame weighs 25.4 lb empty, so the wall structure only has to carry your equipment load plus that.
3) Is this B-Line rack aluminum or steel?
Both. The uprights are aluminum and the extension brackets that carry the load into the wall are steel. The visible finish is brushed aluminum, so it reads as bare metal rather than the black most racks come in.
4) Open frame wall mount rack or an enclosed wall cabinet, which should I use for a network closet?
An open frame like the SB704237424AL gives you access from all sides and free convection cooling, and it is the cheaper way to hang 19 inch gear in a locked closet or back-of-house room. Go to an enclosed cabinet instead when the equipment sits in a public corridor, a classroom, or a dusty shop where you need a lockable door and a dust barrier. This rack has no door or sides.
5) Do I need cage nuts or rack screws for the #12-24 holes on this B-Line rack?
No cage nuts. The panel mounting holes are tapped #12-24, so you order #12-24 rack screws and thread them directly into the upright. If your equipment came with M6 or 10-32 hardware it will not thread, so pick up #12-24 screws with the rack.
6) Is the brushed aluminum B-Line rack going to match the black racks already in my building?
No. This one is brushed aluminum, a bare metal look, not the black powder coat most equipment racks use. If you are standardizing the appearance across telecom rooms in a portfolio, the finish will stand out against black frames.
How fast can I get the B-LINE SB704237424AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB704237424AL come with a warranty?
Absolutely. The B-LINE SB704237424AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB704237424AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB704237424AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.