You may also like
B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, Wall-mounted network equipment rack. Heavy duty,
Model: BLN-SB704192518AL
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
B-LINE
$1,292.34
B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Aluminum - brushed finish, Wall-mounted network equipment rack. Heavy
Model: BLN-SB704197424AL
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed finish, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
B-LINE
$2,521.03
B-Line SB704193918AL Eaton series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, #12-24 panel mount holes, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
Model: BLN-SB704193918AL
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, #12-24 panel mount holes, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
B-LINE
$1,566.24
B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, Extra deep wall mount, Wall-mounted network equip
Model: BLN-SB704237418AL
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, Extra deep wall mount, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
B-LINE
$2,424.59
B-Line Eaton series open racks, Aluminum uprights and steel extension brackets, Offset center, Aluminum - brushed, Wall-mounted network equipment rac
Model: BLN-SB704197430AL
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Offset center, Aluminum - brushed, Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
B-LINE
$2,546.50
Eaton B-Line series open frame racks, Aluminum uprights and steel extension brackets, Aluminum - brushed, Wall-mounted network equipment rack, Heavy duty, 19" Panel mount
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 25.5 in
- Product Length Depth:
- 30 in
- Product Weight:
- 13.1 lb
- Product Width:
- 20.5 in
- Department:
- Electrical
- Product Model:
- Wall-mounted network equipment rack. Heavy duty, 19" Panel mount
- Product Finish:
- Brushed aluminum
- Product Material:
- Aluminum & steel
- Product Length:
- 30 in
B-LINE SB704192530AL – Frequently Asked Questions
1) How much wall space do I need for the SB704192530AL wall-mount rack?
Plan for roughly 20.5 inches of width and 25.5 inches of height on the wall, with 30 inches of depth projecting off it. That 30 inch depth is the number people miss when the rack goes in a corridor or closet, check swing clearance for doors and gear before you pick the spot.
2) What is this Eaton B-Line rack made of, and will it corrode in a damp telecom closet?
The uprights are aluminum and the extension brackets are steel, with a brushed aluminum finish. Aluminum uprights don't rust, which is why this construction gets specified for less than ideal closet conditions; the steel brackets are the part to keep an eye on in genuinely wet locations.
3) Is a wall-mounted open rack like this the right choice, or should I use a floor-standing rack?
A wall-mounted open frame rack such as the SB704192530AL suits small MDF/IDF closets, retail back rooms, and multi-family riser spaces where there is no floor to give up and the equipment count is modest. Go floor-standing when you need full 42U capacity, heavy UPS gear at the bottom, or cable management down both sides. Go with an enclosed cabinet instead when the space is public or unsecured, since an open rack leaves everything exposed.
4) How heavy is the SB704192530AL rack itself for a one-person install?
The rack weighs 13.1 lb bare, so a single installer can hold it to the wall while starting fasteners. The load it will carry is the real constraint, so anchor into studs or use hardware rated for your wall type and the combined weight of the switches and panels going in.
5) Is the SB704192530AL a heavy duty rack or a light one?
Eaton classifies it as heavy duty within the B-Line open frame rack series, with steel extension brackets carrying the load back to the wall and aluminum uprights taking the 19 inch panel mount gear.
6) What part number do I order for the brushed aluminum B-Line wall rack?
Order Eaton B-Line SB704192530AL. That is the single configuration, brushed aluminum finish, 19 inch panel mount, wall mounted.
How fast can I get the B-LINE SB704192530AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB704192530AL come with a warranty?
Absolutely. The B-LINE SB704192530AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB704192530AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB704192530AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.