Eaton B-Line series open frame racks, ASTM A1011CS 11 Gauge steel, Telco gray powder coat, End bumper rail guard - network bay
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .375 in
- Product Length Depth:
- 2 in
- Product Weight:
- .63 lb
- Product Width:
- .13 in
- Department:
- Electrical
- Product Model:
- End bumper rail guard - network bay
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
- Product Length:
- 2 in
B-LINE SB59266TG – Frequently Asked Questions
1) Is the SB59266TG a complete rack or just a component?
Just a component. The SB59266TG is the end bumper rail guard only, part of the Eaton B-Line open frame rack system. At .63 lb it is an accessory piece, so the rack uprights, base and any cable management have to be ordered separately.
2) What is the B-Line SB59266TG end bumper rail guard used for on an open frame rack?
The Eaton B-Line SB59266TG is an end bumper rail guard for a network bay open frame rack. It mounts at the end of the bay rail to take the knocks from cable pulls and passing carts, protecting the rail edge rather than carrying any equipment load. It is a single accessory part, not a rack.
3) What material and finish is the B-Line SB59266TG bumper rail guard, and will it match my existing B-Line racks?
Steel, with a Telco gray powder coat. That is the same standard Telco gray used across the Eaton B-Line open frame rack line, so it blends with existing B-Line bays in that finish. The rack frames themselves are ASTM A1011CS 11 gauge steel.
4) What part number should I order for a B-Line network bay end bumper rail guard in Telco gray?
Order Eaton B-Line SB59266TG. That is the single model offered for the Telco gray powder coat end bumper rail guard for network bays, so there is no finish or size option to specify.
5) How big is the SB59266TG bumper guard and how much does it weigh?
It is a small part: 2 in length/depth, .375 in height and .13 in width, weighing .63 lb. If you are laying out clearance at the end of a bay or aisle, plan on roughly 2 inches of added length per guard.
6) Does the B-Line SB59266TG bumper rail guard carry any listings or certifications?
Certifications are marked Not Applicable for this part. It is a passive steel guard rail component with no electrical function, so no UL or similar listing applies to it. If your facility spec calls for listed components, that requirement falls on the powered equipment in the bay, not on this bumper.
How fast can I get the B-LINE SB59266TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB59266TG come with a warranty?
Absolutely. The B-LINE SB59266TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB59266TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB59266TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.