B-Line Eaton series open racks, Double sided, 340 lb, Steel, Telco gray powder coat, 12-24 panel mounting holes, 38 mounting spaces, Top angle style,

The SB5862084TG is an 84 inch tall open frame rack with 38 mounting spaces. At 7 feet it is the standard telecom relay-rack height, so it drops into the same footprint as the 7-foot racks already lined up in most MDF and IDF rooms.

Rails are tapped 12-24, so standard 12-24 rack screws thread straight in with no cage nuts or clip nuts needed. If your patch panels and switch brackets ship with 10-32 hardware, you will need to swap to 12-24 screws.

Yes. The SB5862084TG is built as a Seismic Zone 4 network bay open duct rack and is UL Listed. Zone 4 is the most severe seismic classification, which is what specifiers in California and similar regions call out on telecom room drawings.

Double sided refers to the rack being configured for equipment and cable management access from both front and rear, which is how network bays get built when cabling lands on both faces. Plan your aisle clearance for access at both sides rather than pushing it against a wall.

Stated dimensions are 19 in width, 84 in height, and 84 in for length/depth, with a product weight of 116.37 lb. The 19 in width is the standard EIA rack width, so 19 inch panels and switch ears mount without adapters.

An open duct rack such as the SB5862084TG suits a secured telecom or MDF room where you want unrestricted airflow and fast cable access from both sides. If the equipment sits in a shared or public space, or needs locking doors and dust protection, an enclosed cabinet is the better call. This is a top angle style frame, which accepts overhead cable runway or ladder rack bolted across the top.

Finish is Telco gray powder coat on steel, the standard color used across telecom relay racks and cable runway, so it lines up visually with existing B-Line bays and ladder rack in most rooms.