You may also like
Eaton B-Line series open frame racks
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 108 IN
- Product Length Depth:
- 108 IN
- Product Weight:
- 130 LB
- Product Width:
- 19 IN
- Surface Finishing:
- Telco gray powder coat
- Department:
- Electrical
- Product Group:
- Racks & Frames
- Product Subgroup:
- Racks
- Product Type:
- Seiemic zone 4, network bay closed duct rack
- Product Details:
- Seiemic zone 4, network bay closed duct rack
- Product Material:
- Steel
B-LINE SB5464108TG – Frequently Asked Questions
1) Is the Eaton B-Line SB5464108TG rack rated for seismic zone 4 installations?
Yes. The SB5464108TG is a seismic zone 4 network bay closed duct rack, so it is built for the highest seismic zone classification used in data center and telecom rooms. It is also UL Listed. Anchoring to the slab per the structural drawings is still what makes the seismic rating meaningful in the field.
2) Is the B-Line SB5464108TG a 19 inch rack that takes standard rack mount equipment?
The frame is 19 inches wide, the standard EIA rack width for switches, patch panels and servers. It is an open frame network bay with closed duct, not an enclosed cabinet, so gear is accessible from both sides and there are no doors or side panels to remove.
3) What does the B-Line SB5464108TG rack weigh for handling and floor loading?
The frame alone weighs 130 lb. That is a two person lift to stand up, and for floor loading calculations you add the weight of everything you mount in it, which in a fully loaded network bay is usually far more than the frame itself.
4) Is the SB5464108TG an open rack or an enclosed cabinet, and which should I spec?
It is an open frame rack, part of the Eaton B-Line series open frame racks. Open frame is what you want when the room itself is secure and you need maximum airflow and cable access from all four sides, typical of a telecom room or MDF. If the equipment sits in a shared or public space and needs to be locked up, or you need to control airflow front to back, an enclosed cabinet with doors and side panels is the right call instead.
5) What part number do I order for the Eaton B-Line seismic zone 4 telco gray network bay?
The manufacturer part number is SB5464108TG, from Eaton's B-Line series. It comes as the one configuration: 108 inch height, 19 inch width, 108 inch length/depth, steel, telco gray powder coat.
6) What finish and material is the Eaton B-Line network bay rack, and will it match existing telco equipment?
Steel frame with a telco gray powder coat, the standard color used across central office and telecom room equipment, so it lines up visually with existing telco racks and bays. Powder coat over steel also holds up better than paint in a room where gear gets slid in and out of the rails.
How fast can I get the B-LINE SB5464108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5464108TG come with a warranty?
Absolutely. The B-LINE SB5464108TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5464108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5464108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.