B-Line Eaton series open racks - Length 21.625 in, Width 12 in, Height 90.125 in - Silver - Aluminum

Yes. The SB860812D096SL supports direct PDU mounting, so a vertical rack PDU can be fixed inside the channel rather than eating rack units in the frame. Check your PDU's own footprint against the 12 inch channel width so cable capacity isn't lost behind it.

Double sided is the right call when you are patching and cabling from both faces of an open frame rack, since gates on the front and the rear give you double the cable capacity and let you dress patch cords on one side and equipment cords on the other. If your rack sits against a wall and is only worked from the front, a single sided manager takes up less depth than the 21.625 inches this one occupies.

The gate style is low density plastic, in black plastic components over a silver powder coat body. Low density plastic gates are meant for typical patch and copper cable fills, opening and closing by hand for access. For very dense fiber or heavy bundle loads, look at a high density gate manager instead.

Push in fasteners and a cable strap mount ship with it. Rack-to-rail attachment screws for your specific frame are worth verifying against what you already stock, but the fastening and strap components for the manager itself are included.

The SB860812D096SL carries a UL certification. That is the rating stated for this part, and it is the one spec facility and institutional buyers usually need on record for a cable management submittal.

It weighs 68.7 lb in aluminum at 90.125 inches tall. That length and weight make it awkward to hold plumb against a rack alone, so plan on two people or a temporary support while you start the top fasteners.

The finish is silver powder coat with black plastic gate components. If your existing open frame racks are B-Line silver, it will read as a match; against black racks the contrast will be obvious, so a black version would be the better standardization choice.