B-Line Eaton series open racks, Quick assembly using hand tools, Steel finish, Flat black powder coat, 36" rail depth, Four post adjustable rack sys

Rail mounting depth adjusts out to a maximum of 36 inches, so it takes deep servers and switches as well as short gear. Because it is a four post adjustable system, you set front and rear rail positions to match your equipment rather than being locked to one depth.

An open frame rack like the SB5542108TG gives you access from all four sides and free airflow, which suits a locked telecom or MDF room where physical security is handled by the door. If the equipment sits in a shared space, a warehouse, or anywhere the public can reach it, you want an enclosed cabinet with lockable doors and side panels instead, since an open frame offers no barrier at all.

The rack itself weighs 102.8 lb empty. At 108 inches tall on a 19 inch wide frame, it is top heavy once loaded, so plan on lag anchoring the base to the slab and, where you have it, tying the top angle into overhead ladder rack or cable runway.

UL Listed, which is what most facility and institutional specs call for on equipment racks. Construction is steel throughout.

The SB5542108TG uses an open duct unequal flange rail profile. The two flanges are different widths, which puts the mounting face off center in the channel and opens up cable duct space alongside the equipment, so patch and power cabling runs vertically beside the gear instead of fighting it. Equipment still mounts to standard 19 inch rail spacing.

Assembly is done with standard hand tools, no press or proprietary hardware. Two people is still the sensible call at 108 inches and 102.8 lb, mainly for standing the frame up and squaring it before anchoring.

Order as MPN SB5542108TG from Eaton B-Line. It is a single configuration, 108 inch height, 19 inch width, steel, with rail depth adjustable to 36 inches, so repeat orders across sites come in identical.