B-Line Eaton series open racks, Steel, #12-24 mounting hardware included, Telco gray powder coat, Low profile rack mounted shelf solid shelf

Yes. The SB745S1919STG is a solid rack mounted shelf built for Eaton B-Line series open frame racks, and it ships with #12-24 mounting hardware so it threads straight into #12-24 tapped rack rails. Shelf width is 17.25 inches, which clears the inside of a 19 inch EIA rack opening, and the mounting hardware included means you don't need to source screws separately.

At 3.42 inches of height, the shelf occupies two rack units (2U is 3.5 inches), so it fits a 2U opening with a hair to spare. That is what the low profile designation means here, useful when you are trying to keep panel space free above and below for patch panels or switches.

The shelf is 19 inches deep, so it supports equipment with a footprint up to that depth. It is a solid shelf rather than vented or cantilever-style, so gear sits on a continuous steel surface, which is what you want for non-rack-mount boxes, media converters, or a small UPS.

No. #12-24 mounting hardware comes with the shelf. If your rack rails are tapped #10-32 instead of #12-24, the included hardware will not thread and you will need matching #10-32 screws for that rack.

Order MPN SB745S1919STG. That is the Eaton B-Line low profile solid rack mounted shelf, 19 inch depth, Telco gray powder coat, with #12-24 hardware included.

Steel construction with a Telco gray powder coat. That finish is the standard gray used across Eaton B-Line open frame racks and accessories, so the shelf matches existing B-Line telco racks and ladder rack in a communications room rather than standing out as a mismatched black panel.

The shelf weighs 11.8 lb. Worth knowing when you are loading out several for a build, and it is heavy enough that a two-post open rack should already be floor-anchored before you start stacking shelves and gear on it.