Eaton B-Line series open frame racks, Steel, #12-24 mounting hardware, Three mounting spaces required, Flat black powder coat, Single sided rack mounted shelf solid shelf
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 5.19 in
- Product Length Depth:
- 15 in
- Product Weight:
- 12.1 lb
- Product Width:
- 22.31 in
- Special Features:
- Three (3) mounting spaces required
- Department:
- Electrical
- Product Model:
- Single sided rack mounted shelf solid shelf
- Product Finish:
- Flat black powder coat
- Product Material:
- Steel
- Product Length:
- 15 in
B-LINE SB747V2315SFB – Frequently Asked Questions
1) How many rack units does the Eaton B-Line SB747V2315SFB shelf take up?
Three mounting spaces are required for the SB747V2315SFB shelf, so plan on 3U of open panel space on the rack rails. Its stated height is 5.19 inches, which is consistent with a three-space allocation. If you only have 1U or 2U free between patch panels or a UPS, this shelf will not drop in.
2) Is the B-Line rack shelf supported at the front only, or front and rear?
It's a single sided rack mounted shelf, so it bolts to the front rails only and cantilevers back. Depth is 15 inches and the shelf weighs 12.1 pounds empty. Single sided mounting is fine for an open two-post relay rack, but for heavy gear that needs support at both ends you want a four-point or rear-supported shelf instead.
3) What mounting hardware do I need for the Eaton B-Line open rack shelf?
It mounts with #12-24 screws, the standard thread on Eaton B-Line open frame racks. If your rack rails are tapped 10-32 or use square-hole cage nuts, you'll need different fasteners or a different shelf.
4) Will this shelf fit a standard 19-inch equipment rack?
Yes. The SB747V2315SFB is part of the Eaton B-Line open frame rack series and its overall width is 22.31 inches, which covers the 19 inch mounting rails plus the flanges that bolt to them. Depth is 15 inches, so confirm you have that much clear space behind the rails in an open rack layout.
5) Is this a solid shelf or a vented one?
Solid steel, not vented. That makes it suitable for setting non-heat-generating gear, tools, or a monitor on, but for equipment that relies on bottom or top airflow through the shelf you want a vented version.
6) What finish is the B-Line SB747V2315SFB shelf, and will it match my existing black rack?
Flat black powder coat over steel, the same finish used across the Eaton B-Line open frame rack line, so it matches black B-Line relay racks and accessories. If your rack is gray or clear anodized, expect a visible difference.
7) How heavy is this rack shelf for a one-person install?
12.1 pounds empty, so one tech can hold it against the rails and start the #12-24 screws without help. It occupies three mounting spaces, so mark the top and bottom hole positions before you lift it into place.
How fast can I get the B-LINE SB747V2315SFB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB747V2315SFB come with a warranty?
Absolutely. The B-LINE SB747V2315SFB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB747V2315SFB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB747V2315SFB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.