B-Line Eaton series open racks, Steel, Fits 84"racks, Removable back with cable routing, Eaton white powder coat, Used with , , , RCM Vertical cable

SB862BRC10084EW is the removable back cover for an RCM vertical cable manager, not the manager itself. It is the rear panel with cable routing openings that closes off the back of the channel, made of steel in Eaton white powder coat, 10 in wide and 84 in tall.

Yes, the cover is sized for 84 in racks and measures 84 in in height, so it matches a full-height 84 in open frame rack run. On a 45U or shorter rack of a different height it will not line up.

It is used with the SB860, SB862 and SB864 RCM vertical cable managers. Match the 10 in width to the channel you have: this cover is the 10 in wide version.

It has cable routing in the back, so you can bring cable out of the rear of the channel toward a wall, ladder rack or an adjacent bay instead of forcing every run out the front fingers. The panel is removable, so you can pull it off during a large pull and put it back to dress the rear.

On a double-sided manager mounted between racks the rear is already enclosed by the second channel, so the cover is aimed at a single-sided or end-of-row manager where the back of the channel would otherwise be open. Fit it where you want cable contained and a finished appearance at the end of a row, or where the rear faces a walkway. It is a bolt-on steel panel, 8.2 lb, so it can be added later.

The cover is finished in Eaton white powder coat, the same white used across the B-Line series open frame racks and RCM managers, so it matches a white B-Line row. If your existing racks are black, this panel will not blend.

It weighs 8.2 lb. It is an 84 in long steel panel, so the weight is not the issue, the length is; two hands or a second person makes lining up the full height easier.